Regviz

Espressif Systems /ESP32-S2 /RTC_CNTL /BROWN_OUT

Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text

Interpret as BROWN_OUT

Share

Cut and paste this URL to share the unmodified register and value:

https://regviz.com/r/Espressif Systems/ESP32-S2/RTC_CNTL/BROWN_OUT#0x0

31 2827 2423 2019 1615 1211 87 43 0 0 0 0 0 0 0 0 00 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 (BROWN_OUT2_ENA)BROWN_OUT2_ENA 0INT_WAIT0 (CLOSE_FLASH_ENA)CLOSE_FLASH_ENA 0 (PD_RF_ENA)PD_RF_ENA 0RST_WAIT0 (RST_ENA)RST_ENA 0 (RST_SEL)RST_SEL 0 (CNT_CLR)CNT_CLR 0 (ENA)ENA 0 (DET)DET

Description

Brownout configuration register

Fields

BROWN_OUT2_ENA

Enables the brown_out2 to initiate a chip reset.
INT_WAIT

Configures the waiting cycle before sending an interrupt.
CLOSE_FLASH_ENA

Set this bit to enable PD the flash when a brown-out happens.
PD_RF_ENA

Set this bit to enable PD the RF circuits when a brown-out happens.
RST_WAIT

Configures the waiting cycle before the reset after a brown-out.
RST_ENA

Enables to reset brown-out.
RST_SEL

Selects the reset type when a brown-out happens. 1: chip reset 0: system reset.
CNT_CLR

Clears the brown-out counter.
ENA

Set this bit to enable brown-out detection.
DET

Indicates the status of the brown-out signal.

Links

()

Register License

Copyright 2024 Espressif Systems (Shanghai) PTE LTD

Licensed under the Apache License, Version 2.0 (the “License”); you may not use this file except in compliance with the License. You may obtain a copy of the License at

http://www.apache.org/licenses/LICENSE-2.0

Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an “AS IS” BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.

 ()

Register Reference

https://github.com/espressif/svd